CVA Hawken screws needed... tang screw and hammer screw

[mistermog]

Hi guys,

I bought a partial CVA Hawken kit and need the above screws. I found the tang screw online but 10 bucks (after shipping) for 1 screw is a bit nuts.

Anyone have screws laying around or know what specs they are?

I read somewhere that CVA uses the same screws as Traditions, but not Thompson Centers (metric vs standard threads, respectively)

Anyone have some info?

[bubba.50]

they don't have a website but, contact :

Deer Creek Products
6989 E. Mich Rd
Waldren IN 46182
phone # 1-765-525-6181

for all yer cva needs. they have most any cva part ya could ever need & if they don't they could likely tell ya what would work. luck & have a good'en, bubba

[mistermog]

Thanks, will call them tomorrow. I think I saw some forum posts advertising them back in 2008 as well, someone was asking for a tang screw as well, and was told no dice. So, cross fingers! If anyone has an info on what the measurements are, maybe I can find something at lowes that would work. :)

[mooman76]

Yes the CVA and Traditions were the same not too long ago. Made by the same manufacturer.