hickfu
06-14-2014, 04:11 PM
I just got the Lyman 4500 and a couple of the size/lube dies and wanted to see how it works.... It works AWESOME! I lubed some boolits in 5 to 6 minutes that would have taken me an hour to do pan lubing... This thing is probably the best thing I have purchased since I started casting and lubing boolits..
Ok, I know there will be some of you PC guys looking here but try not to flame me too badly.. They were the only boolits I had sitting around to do and I really wanted to give the Lyman a try!!
107790
I figure I will load these up for some fun plinking, I love the lube/sizer! I will never pan lube again..
EDIT: dont look at the ring around the nose!!! I dont have the correct punch so I used the punch from a 9mm TC boolit :veryconfu
Doc
Ok, I know there will be some of you PC guys looking here but try not to flame me too badly.. They were the only boolits I had sitting around to do and I really wanted to give the Lyman a try!!
107790
I figure I will load these up for some fun plinking, I love the lube/sizer! I will never pan lube again..
EDIT: dont look at the ring around the nose!!! I dont have the correct punch so I used the punch from a 9mm TC boolit :veryconfu
Doc