PDA

View Full Version : What top punch for NOE 358477


jsheyn
05-03-2014, 01:22 PM
Got a used NOE 358477 which usually come with too punch.

Anyone tell me what RCBS#
Wayne S
05-03-2014, 03:45 PM
Contact NOE, they sell TP's for their molds
Iowa Fox
05-03-2014, 04:15 PM
Lyman #429 is what the Lyman 358477 uses. One of the most common easiest to find top punches.
jsheyn
05-03-2014, 07:21 PM
Thanks!
Teddy (punchie)
05-03-2014, 10:17 PM
Not sure if I have one would have to check. PM if you would want me to look. About 15 min. from you.
GP100man
05-04-2014, 07:34 AM
I use either a plain flat punch or a 495 for the majority of my rnfp or swc & wc boolits for the 38/357.

This works fine for boolits up to a little pressure to get em to go thru the sizing die (12-13 bhn & 1,2 thou. over the size of the die) but for more pressure the correct nose punch becomes more important.

A non issue with the nose first sizers .