View Full Version : 8x57 Mauser Berda Primer Dimensions
JeffG
05-02-2014, 10:41 PM
Anybody have any idea what the dimensions are for berdan primers used in milsurp 8x57 Mauser brass? When I search online, I see 7.62 mentioned, etc but never 8x57 and I know there are a variety.
Thanks!
frnkeore
05-02-2014, 11:16 PM
From my German 8x57 cartridge site.
Frank
103896
Dutchman
05-02-2014, 11:34 PM
Pretty sure its .217". Same as for the Swedish 6.5x55.
Dutch
frnkeore
05-03-2014, 02:22 AM
Here is the complete cartridge case drawing, 5.45mm = .2146. 5.43mm = .2138
Frank
103907
UBER7MM
05-04-2014, 08:33 AM
From my German 8x57 cartridge site.
Frank
.
Frank,
.
Could you share your 8x57 cartridge website's URL?
.
Thank you in advance.
frnkeore
05-04-2014, 02:23 PM
Here you go, Uber. It has the most complete WWII era factory information on the 8x57 cartridge that I have found.
http://home.scarlet.be/p.colmant/polte.htm
Frank
UBER7MM
05-04-2014, 04:18 PM
Thanks Frank,
.
That looks to be an interesting website.
hardy
05-04-2014, 05:30 PM
Hi ,I drilled and picked out some Yugoslav milsurp primers,the pockets went.215".Ball bearing and large hammer swaged pocket mouth to accommodate a Boxer primer of .210" snugly.These will be used for light plinkers with appropriate caution.Good luck,Mike
JeffG
05-04-2014, 08:33 PM
Here is the complete cartridge case drawing, 5.45mm = .2146. 5.43mm = .2138
Frank
103907
This is great, thanks a million for this!
frnkeore
05-04-2014, 11:44 PM
Jeff, your welcome.
Frank
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.