Bullshop Junior
04-21-2014, 08:57 AM
Got a few things I figured I might be able to help someone out with.
First up is about 50 pieces of steel case berdan primed non corrosive 7.62x39 cases. This was loaded ammo and my handi rifle didnt have enough to set off the primers. A few of the primers are dented but still go bang just fine. I pulled the bullets and reused them and the powder in boxer primed cases. If someone wants to stuff powder and bullets in these they are good for at least one shot.
Second thing is a set of RCBS 270 die shells. No lock rings. No seater stem. No decaping rod. Just the die shells. RCBS would have the parts to get them working or use them to make something else.
Let me know of you can use any of it.
First up is about 50 pieces of steel case berdan primed non corrosive 7.62x39 cases. This was loaded ammo and my handi rifle didnt have enough to set off the primers. A few of the primers are dented but still go bang just fine. I pulled the bullets and reused them and the powder in boxer primed cases. If someone wants to stuff powder and bullets in these they are good for at least one shot.
Second thing is a set of RCBS 270 die shells. No lock rings. No seater stem. No decaping rod. Just the die shells. RCBS would have the parts to get them working or use them to make something else.
Let me know of you can use any of it.