S. brake on 550-b Dillon

[gunoil]

More stable: Shake Brake or whatever ya wanta call it.

http://i1113.photobucket.com/albums/k511/putt2012/null_zps84cf80ac.jpg

Solid: to the floor, the chrome "lund" cargo spreader bar from ebay.
http://i1113.photobucket.com/albums/k511/putt2012/null_zpsa5937aad.jpg

[gunoil]

This SOB, has no case retainer @ sta.-1. Cases move, cant size or prime alot of em unless ya have something to push with. One thing great bought dillons, they fight over em on ebay.

[Hawkeye45]

There is an adjustable spring wire, kind of like a partially opened paper clip on my stage one that holds the case in, I have run thousands of rounds thru the sizing stage without a problem. It works for me.

Mr. Ed

[wrench man]

There is an adjustable spring wire, kind of like a partially opened paper clip on my stage one that holds the case in, I have run thousands of rounds thru the sizing stage without a problem. It works for me.

Yep, it too requires fiddling with every time you change out to load something else, but it works quite well.

[Bad Water Bill]

Take a look at our sponsor "INLINE" above.

They are a little more expensive but you will never find a stronger base.

Also they have an LED light that fits in the center of the die plate so you will be able to visually check your powder drop before inserting the projectile of your choice.

Call Dillon and they will probably put that paper clip??? in the mail the same day "for free".

[gunoil]

Guys you didnt notice this 550 has a case feed. SO AGAIN THERE IS NO CASE RETAINER IN STATION 1.