Changeling
04-18-2014, 06:03 PM
I received this mold the other day, and it doesn't seem to have any of the problems that a lot of people have identified with there molds from Lee (only LEE mold I have).
Using a 10 power magnifying glass.
There are NO gaps in the joining of the mold blocks whatsoever.
The joining of the 2 blocks is flawless.
The bullet holes whether drilled/ground or CNC cut, is as perfect as it could be, absolutely NO off set between halves.
I couldn't find any burrs whatsoever, even by draping a tissue and draging it over all surfaces of the mold, that surprised me!
This was just preliminary investigation of the mold it self as delivered. I had not cleaned it other than washing it off under HOT water and letting it dry before looking.
Just thought some would like to know!
Using a 10 power magnifying glass.
There are NO gaps in the joining of the mold blocks whatsoever.
The joining of the 2 blocks is flawless.
The bullet holes whether drilled/ground or CNC cut, is as perfect as it could be, absolutely NO off set between halves.
I couldn't find any burrs whatsoever, even by draping a tissue and draging it over all surfaces of the mold, that surprised me!
This was just preliminary investigation of the mold it self as delivered. I had not cleaned it other than washing it off under HOT water and letting it dry before looking.
Just thought some would like to know!