Too funny

[armoredman]

I guess I didn't QUITE get both sides of the mold in the melt to heat up...

http://i16.photobucket.com/albums/b13/armoredman/casting%20stuff/heatmightbeuneven_zps88a377b5.jpg (http://s16.photobucket.com/user/armoredman/media/casting%20stuff/heatmightbeuneven_zps88a377b5.jpg.html)

[Pb2au]

Nope, too much gravity on the left side.

[Doc_Stihl]

I think the heat is fine...you just didn't flux the right half of your pot well enough... :kidding:

[3leggedturtle]

Don't you know; or no one told you that: you need to stir the flux in a figure 8 pattern to avoid that! :veryconfu

[dondiego]

Is that a right handed, or left handed boolit?

[w5pv]

Looks like stickem boolits,If you don't like the stickem back in the pot

[Epd230]

Is that one of them Dum Dum rounds that other guy was talking about?

[161]

Check with the guys from Australia. The shinny side would be the other side there I think.

[runfiverun]

I'd just turn it around,,,,,,,,,,,,,, and throw it back.

[leeggen]

Hummmmm ying and yang maybe?

[Bloodman14]

You cut two boolits in half and then glued them together, right? Right?!

[wallenba]

Yep... ya need to stir BOTH sides of the pot.

[Mk42gunner]

That is a keeper, but it needs to be mounted on the "oops" board.

Robert

[leftiye]

Take a bore brush to the frosted side. (It's hotter, but has insulating something on it) Also, clean the mold faces so they'll transfer heat. Pour the lead (tilt mold to) on the shiny side first (fill with mold tilted).

[Shiloh]

You been messin' with the boolit feng shui or ch'i??

Shiloh

[captaint]

Can tell you're new at this. You gotta learn to hold your mouth right..

[shredder]

That is pretty cool actually, despite all the funny remarks. I have never seen one drop like that.

Keep trying you are half way there!!