So what mold is best for my 30-30

[milsurpaddict]

Given my last post

http://castboolits.gunloads.com/showthread.php?236132-Problem-with-hand-load-and-chambering-my-30-30 which mold would you recommend.

Thanks

[Bill*B]

Every rifle is a little different, but in my 1980s vintage Winchester I like the 31-185J from Accurate Molds. If you have any interest in that one, PM me your address, and I'll mail you a dozen bullets to try.

[HiVelocity]

All things considered, I still recommend the NOE (RD) 311-165-rf.

I bought the hp version. Works in all 3 of my 30-30's.

HV

[williamwaco]

I have had really good results with the Lee 170 gr RF
Size it .311

It is a clone of the Lyman 311041 which produced 3" groups at 100 yards in my Marlin 336 back in the '70s


Try 9 grains Unique for a mild load or a starting load of 3031 for a hunting load.

The 9 grain load is giving me .5 inch groups at 50 yards from my Thompson Contender.

[runfiverun]

wellll ,,,, you could use any of those mentioned above, or the rcbs 150 or 180gr versions.
they should all do just about anything you want from 1-k through 2400 fps in the 30-30.

[retiredPO]

Hi-V.... id didnt know your had the HP version.....you scamp you

[Dan Cash]

31141 or any reasonable clone performs veery well for me from about 1200 to 2400fps.