great site

[joejr]

hi guys i've been casting my own for 4or 5 years for 6 handguns and 5 rifles. i've learned a lot reading on this site ,great info. all my cast loads shoot better than jacketed except my smle#4mark1 savage i need a bigger mould something around .316 .317 it slugs .315. the next time i get to kittery i'll se what they've got .
greetings from moosehead lake
joejr

[dubber123]

Welcome aboard, you will learn alot here! I have gotten a few "Kittery" moulds myself.

[Blammer]

welcome!

I'm sure someone has a Fat mould that will work for you, keep your eyes open.

[Pepe Ray]

Native or immigrant?
Pepe Ray

[mooman76]

hi guys i've been casting my own for 4or 5 years for 6 handguns and 5 rifles. i've learned a lot reading on this site ,great info. all my cast loads shoot better than jacketed except my smle#4mark1 savage i need a bigger mould something around .316 .317 it slugs .315. the next time i get to kittery i'll se what they've got .
greetings from moosehead lake
joejr

You could get the biggest Lee mould you can and Lament it to make it big enough. That is if you can't find a mould that will work!

[Buckshot]

..................We have a "Fat 30" GB going for a Loverin design at the moment. It's spec'd at .316" .

.................Buckshot

[joejr]

i grew up in scarborough,been living in rockwood for 21 years

[Shiloh]

Welcome.

There is a mountain of information here at Cast Boolit Forum. There are many knowledgeable folks who are generous with there time and experience in answering questions.

Shiloh

[Pepe Ray]

joejr;
Dunstan or Oak Hill?
Pepe Ray

or are these places only a footnote in history?

[joejr]

PepeRay
1 mile down from oak hill on 114