H&R 7X30 Waters

[ASSASSIN]

http://i193.photobucket.com/albums/z132/HonkerHunter_photos/7X30%20Waters/163_zps9b589de6.jpg


http://i193.photobucket.com/albums/z132/HonkerHunter_photos/7X30%20Waters/178_zps81139f16.jpg


http://i193.photobucket.com/albums/z132/HonkerHunter_photos/7X30%20Waters/169_zpsa09e735b.jpg


http://i193.photobucket.com/albums/z132/HonkerHunter_photos/7X30%20Waters/170_zps214cb847.jpg


http://i193.photobucket.com/albums/z132/HonkerHunter_photos/7X30%20Waters/164_zps5f4dc698.jpg


A

[TCLouis]

Sure looks like it would be a 45-70.

[uscra112]

That's a wrist-breaker to fire, I'd reckon.

[Bullshop Junior]

Where is the stock?

[ASSASSIN]

The barrel stub was from a 45/70 but, the new barrel is a 7X30 Waters...

The customer did not send in a stock with this barrel build....

[bikerbeans]

Nice work! How are you going to change the cartridge ID on the barrel?

BB

[ASSASSIN]

Thank you BB.

I milled it off and restamped it....

[Bullshop Junior]

Did you do a liner or a cut and weld?

[ASSASSIN]

I do barrel liners in shotgun barrels for various small low pressure cartridges and everything else is barrel stubbed...

The 7X30 Waters was a barrel stub, where the stub was bored, reamed and threaded. Then the 7mm barrel blank was threaded and chambered, screwed into the stub till it butted up against the breech face. The muzzle brake was also threaded and screwed onto the barrel. There were "3" separate pieces of steel, machined and finished to look like one solid piece of steel or barrel....

[scattershot]

Well, you did a beautiful job with it.

[ASSASSIN]

Thank You scattershot!

[dk17hmr]

Very nice.... extractor or ejector?..... what does something like that run?....$ wise

[ASSASSIN]

This was an extractor model...

Cost depends on several factors -

Barrel blank...

Muzzle brake...

Forend work...

Scope rail / iron sights...

Trigger job...

Etc....

[dougader]

Do you have a website, or just take orders via emial and/or phone?

I have to agree, that is beautiful work.

[dragonrider]

NICE WORK. I remember your other postings and pictures, You are a talented fellow indeed.

[ASSASSIN]

Thanks fellas, I appreciate it...

Lots more pictures on the forum side of the website...


dandtcustomgunworks.com