View Full Version : Thompson Center Contender, Muzzleloading barrel
4060MAY
04-05-2014, 04:31 PM
Any one install a muzzle loading barrel on a T/C Contender, using #11 caps
if so
how did you get around the problem of powder fouling in the firing pins..and will the firing pin reliably set off caps
at one time I had a H&R 45cal Huntsman, firing pi stuck from fouling easily
M-Tecs
04-05-2014, 05:13 PM
Didn't know anyone made one for #11 caps. Only ones I have seen are 209 primers. I don't see away around the fouling issues with #11 caps. It was a pain with the slam fire systems designed to handle the fouling.
johnson1942
04-05-2014, 05:37 PM
good idea, smokeless muzzleloader incorporated can do the job for you and forget the number 11/s go with the 209 primers. cheaper and reliable.
4060MAY
04-06-2014, 09:51 PM
the rules for the pistol matches we shoot, are no 209 primers, caps or closed ignition is ok
doesn't make sense to me, But that's the way it is
seems like there is no good way to do it, even 209 primers in a closed setup is a pain
might be best to forget it
thanks for the relies
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.