220
04-05-2014, 08:21 AM
Anyone have experience with this mould in 9mm?
I'm just about to admit defeat with my 9mm and buy a GC mould.
Ive slugged it sized from bore to 2 thou over, numerous alloys, powders, lubes, used different size expanders, different moulds, just about everything that should fix the problem but nothing has, I still get rapid lead build up in the throat.
Accuracy isn't an issue from a clean barrel but it quickly disappears as the lead builds up.
So I am seriously considering a GC mould and can get hold of a RCBS .356 124RN GC any other suggestions on a 9mm GC.
I'm just about to admit defeat with my 9mm and buy a GC mould.
Ive slugged it sized from bore to 2 thou over, numerous alloys, powders, lubes, used different size expanders, different moulds, just about everything that should fix the problem but nothing has, I still get rapid lead build up in the throat.
Accuracy isn't an issue from a clean barrel but it quickly disappears as the lead builds up.
So I am seriously considering a GC mould and can get hold of a RCBS .356 124RN GC any other suggestions on a 9mm GC.