Quiettime
03-29-2014, 02:53 PM
Hey gang. I found this site a few years ago when I first started casting ingots from wheelweights and thought I had contaminated them with zinc (Turns out it was just antimony, thanks guys)
I moved on to casting round balls for the 1860 clone I bought on sale from Cabelas. Then Fortunecookie45LC videos encouraged me to start casting the Lee 358-105 from range scrap and later the Lee 309-180 and 309-200. I have started dabbling with tumble-coating and today placed an order for my first NOE mold, the 311-247 5 cav w/hp
I have learned SO MUCH from y'all. The only complaint I have for the site is THERE'S TOO MUCH INFO TO DIGEST!!! Looking forward to posting questions (most of them have been answered already!) and some of my own experience as well.
Cheers!
Chris in FLA
I moved on to casting round balls for the 1860 clone I bought on sale from Cabelas. Then Fortunecookie45LC videos encouraged me to start casting the Lee 358-105 from range scrap and later the Lee 309-180 and 309-200. I have started dabbling with tumble-coating and today placed an order for my first NOE mold, the 311-247 5 cav w/hp
I have learned SO MUCH from y'all. The only complaint I have for the site is THERE'S TOO MUCH INFO TO DIGEST!!! Looking forward to posting questions (most of them have been answered already!) and some of my own experience as well.
Cheers!
Chris in FLA