load data needed for 3 or 3.5 winchester polyformed #1 buck load

[jhunter77]

I am looking for some published load data. I have not had much luck. Please post if you have load data for 3 or 3.5" Winchester polyformed for #1 buckshot. Thanks

[pipehand]

I'm guessing that you want to recreate Winchester's 3 inch 24 pellet XB1231 load. I don't have the data either, but if you cut up a factory round it will give you an idea of the wad column used, and the weight of the pellets. If I remember correctly, their number 1 pellets are undersized at around .286". You could weight the powder. It willing most likely be a non canister grade, but you could compare it to known data for curiosity's sake.

[straycat]

Hodgdon has load data for Win. polyformed. Look on their website.

[jhunter77]

Hodgdon did not show any Buck shot loads for that shell. Thanks