View Full Version : Need a source for Winchester 70 PF/CRPF Magnum Extractor
JLarsson
03-25-2014, 08:34 PM
I am looking for a Winchester Model 70 Magnum extractor for the Push Feed/Controlled Round Push Feed bolt. Winchester is out of the magnums and won't be making any more. I found one place online that does have some, but they want $47.50 to ship me one - seems excessive for a <$7 part.
Anyone know where I can get one for a reasonable price? I ordered a couple standard extractors from Winchester and I'm going to try to reshape one, but I'm not against having the real thing.
Thanks!
Skipper
03-25-2014, 09:39 PM
I don't know about the less than 7 bucks price. I see them at several places from 47-54 bucks.
JLarsson
03-25-2014, 09:56 PM
Wow! That's scary. The standard extractors from Winchester are $6.50 each, plus shipping. This isn't the claw type extractor of the controlled round feed bolt. The part in question is about 3/8" square, 3/16" or so thick, with a hole drilled in the center for the retainer.
Here's a picture of a push feed boltface. The extractor is the silver piece in the right side.
http://i922.photobucket.com/albums/ad68/da357mag/100_0280.jpg
Skipper
03-25-2014, 11:34 PM
Might give Brownells a try:
http://www.brownells.com/parts/Winchester/70/index.htm
JLarsson
03-26-2014, 01:02 AM
Thanks for the link. Brownell's has the claw extractors, but not the push feed type. Numrich - Gun Parts has the standard push feed extractors, but not the magnum.
JLarsson
04-04-2014, 09:56 PM
Update - I got a couple standard extractors from Winchester ($6.50 each + shipping) and reshaped one to work with the magnum bolt face. Now I can drop one straight into the chamber and the extractor will push over the rim of the case and engage the extractor groove.
A little polishing of the feed ramp and smoothing the edge of the chamber EVER so slightly, and I think I'll be good to go.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.