Cast Boolits
>
Casting & Reloading
>
Casting Equipment
> Lead slug mold
PDA
View Full Version :
Lead slug mold
just bill
03-21-2014, 05:18 PM
I am working on an aluminum slug mold for 3" long slugs, what would be the best way to make guide pins? I didn't see any on the Lee mold parts list.
Thanks,
Bill
AlaskanGuy
03-21-2014, 10:36 PM
I would use an Ice pic.... They are pretty hard steel
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.