View Full Version : 8 x 56R
tsignal
03-12-2014, 06:09 PM
I have a design for a .332 bullet to use in the 8x56r Hungarian Mannlicher. Its a spire point bullet with three lube grooves and takes an 8mm gas check. Lee's C329-205-1R mold just doesn't shoot well in my rifle. My question --- Where do I go from here???????
oscarflytyer
03-12-2014, 10:00 PM
I have a design for a .332 bullet to use in the 8x56r Hungarian Mannlicher. Its a spire point bullet with three lube grooves and takes an 8mm gas check. Lee's C329-205-1R mold just doesn't shoot well in my rifle. My question --- Where do I go from here???????
Not quite sure, but let me know! I have the rifle and want to cast for it.
SciFiJim
03-12-2014, 10:47 PM
I have a design for a .332 bullet to use in the 8x56r Hungarian Mannlicher. Its a spire point bullet with three lube grooves and takes an 8mm gas check. Lee's C329-205-1R mold just doesn't shoot well in my rifle. My question --- Where do I go from here???????
You should shoot a PM to SwedeNelson. He is the proprietor of NOE Bullet Molds. (http://noebulletmolds.com/NV/index.php?osCsid=i4ruag7ce430qfdaggfj4vmmt7)
He might be interested in working with you on a new design.
I'd be interested if it becomes a reality. Don't go with Mihec. He makes fantastic molds but he's backed up 2+ years. Lee can assist as well, though for awhile their custom stuff was spotty in quality.
Charley
03-13-2014, 06:34 PM
Easiest, cheapest way is to lap out the Lee push through sizer from .329 to .32 or .333, then size down a .338 bullet. Works fine for me.
Wayne Smith
03-14-2014, 07:57 AM
Shouldn't need a new design. I believe Swede has the Oldfeller Frankenstein in his list of molds.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.