Cut down 223 brass

[Bullshop Junior]

I have 30 pieces of unfired 223 brass that has been cut just below the shoulder. These were loaded blanks that I cut apart to get the powder and primers out. Not sure if they are long enough for 221 fireball or the blackout. I can measure them
If you like. They are long enough for 7.62X25 easily. They are yours if you can use them.

[KYShooter73]

I can't use them as I'm trying only to us LC brass for my blackout, but I trim to 1.368. If they are longer than that, they should be fine.

[Bullshop Junior]

Ill measure them when I get off work tonight.

[Bullshop Junior]

There are only 14 that are longer then that, but all but one Re over 1.300.

[Redd508]

I'll take them if their still available