Hornady Pistol Powder Measure

[tonyb]

Do they still make them?

[Moonman]

?????????

Do you mean THE "PISTOL" ROTOR that fits inside the
Hornady powder Measure?

[tonyb]

98477

?????????

Do you mean THE "PISTOL" ROTOR that fits inside the
Hornady powder Measure?

[cheese1566]

Negative Ghostrider!
But I do believe the bushings and plastic hoppers are still available.

Are you looking for one?

[tonyb]

Negative Ghostrider!
But I do believe the bushings and plastic hoppers are still available.

Are you looking for one?

Yes, have one. and a few bushings Looks out of the box mint I don't think it's ever been used. I was just wandering
Thanks.

[Wayne Smith]

I don't think anyone is actively making the bushings now but they are sometimes available in Shopping and Selling. Haven't seen them adequately identified on eBay.

[lawdog941]

You can find the bushings every now and then. Just google it and some places still have them. I have most of them except the real small bushings. Although its been a few years since I checked. Good luck.

dogg

[NVcurmudgeon]

I have a Hornady pistol measure that looks exactly like your picture. I like it very much and use it for most pistol loads. Mine came from Midway at least fifteen years ago, but the measures are no longer made. As of two or three years ago, a complete line of bushings were available from Graf and Sons. I don't know if Hornady still makes the bushings. If you don't have the instructions and charge table you can PM me for a copy.

[tonyb]

I have bushings 7,8,9,11,12,13,16

[Wayne Smith]

Mine came from eBay cheap because the aluminum slide was broken. Buckshot made me a very nice steel one and I only had to take a couple swipes with a file to get it to fit. Once it warms up I'm gonna try to make some of my own bushings with two drill chucks in my wood lathe. drill bit in one and the brass in the other.

[Mike W1]

Those bushings are available from Hornady, at least I bought a couple not too far back. They make a run of them on occasion.