Steyr M95 sluggin question

[Spawn-Inc]

before i got through the scary process of slugging my new M95 short, do i have to slug the whole bore, or is the last 2" good enough? i slugged the first 2" of the bore and got 0.3315" for the grooves and 0.315" for the lands. if i run the slug through the whole barrel, won't it stay at smallest measurements?

i just ran the same slug through the bore and it got easier once it was at the halfway mark, but measured the same as the first 2" of the bore.

[roverboy]

From what I hear about Steyr 95 rifles that's about normal for a groove diameter. They run usually about .329-.331 or so. I'd say you'll probably have a decent shooter.

[Spawn-Inc]

i heard alot of them were really sloppy at .336 and larger, either way i can't wait to shoot it! i have the lee mold and die set on it's way plus some ppu ammo to get brass from.