Looking for Auto trans parts

[abunaitoo]

Being stuck on a rock in the middle of the ocean, almost everything has to be brought in.
Hard to find anything but common, fast selling stuff.
With the good people here, I thought I'd ask here befor ordeing what I need.

I have a 1990 Nissan RE4F02A auto trans I'm rebuilding.
I need the lower roller bearing race for the high clutch hub. Can send picture.

If anyone works at atrans shop, or has a place near by, i would really appreciate it.

[strongbow67]

transtar, locations in cali.

[oneokie]

A 199 nissan? Kinda old to be trying to find parts for. :wink:

[Blammer]

try rockauto.com

[foesgth]

I don't see the part you are trying to find. Can you give me the part number. Here is the drawing (http://oskin.ru/pub/chrysler-dodge/manuals/Automatic_Transmission_Catalogs/NISSAN%20Transaxle/re4f02a_04_w.pdf). I usually get my parts from Rockauto.com

[abunaitoo]

Thanks for the replys. I knew I could count on people here.
I checked with rock auto. They don't have it.
The link for the diagram dosen't show a number for the races. From the picture, it's the round washer in front of #45 in the high clutch set. There are two of them (back one not shown), one in front, and one behind part #72.

I found a diagram for the trans at Transtar. (Thanks Strongbow 67)
http://www.transtar1.com/catView.asp?ID=627
Click on Nissan and go to RE4F02A.
The numbers I'm looking for are:
228B......Race, High Drum to hub (metal w/3 inner tabs)...73228....31439-21X00

I hope someone can help.

[strongbow67]

sounds like you might be looking for a couple of thrust washers which might be in the bearing kit part#k68500s it says n.i. so they are not illustrated and just so you know that illustration is a direct copy out of a transtar catalog if you do not find what you need give them a call they know their tranny parts I have rebuilt hundreds of trannys with their parts

[gtgeorge]

PM me if you still need it and I will go look in my core building if you want a used one.

[abunaitoo]

It is a thrust washer. It's the one with three tabs on the inside.
I'm still looking for one.
Contacted Transtar in Kalifornicate. $12 for the part, $50 for the shipping.
Contacted two other places. Still waiting for a reply.

[Doc_Stihl]

If the parts isn't too big couldn't someone stateside and close find the part and toss it in a flat rate box???

[abunaitoo]

PM sent to foesgth

[strongbow67]

are there any tranny rebuilders on the island that might have them?

[gtgeorge]

3 prong race that goes on bottom of the direct/high clutch drum to bearing race between drum and hub is in my hand. Will PM shortly.

[abunaitoo]

Much thanks to all who replied to this posting.
gtgorge found one for me, and it's on the way.

It just proves that many members on this fourm are true Americans.
Willing to got out of their way to help someone they have never met.
Just like I remember in the old days.

[DoubleAdobe]

Warm and fuzzies, seriously.