View Full Version : 476 sizing die
white eagle
02-24-2014, 04:06 PM
where do I find one ,or a custom one
bhn22
02-24-2014, 04:18 PM
What style sizer do you need?
historicfirearms
02-24-2014, 04:21 PM
I made a push through sizer in this size from a 30-06 seater die. Used the seater stem to make a punch that fit on my reloading press ram shell holder. Cut off the sizer die with a hacksaw below where the 30-06 necks down, it just happened to be very close to the correct size. It took just a little honing out to get the perfect size.
white eagle
02-24-2014, 05:42 PM
lyman or lee makes no difference
denul
02-24-2014, 06:53 PM
Lathesmith on this site made me a dandy in .477. He is fast as well.
sixshot
02-25-2014, 12:40 AM
Can't go wrong with the Lathesmith dies.
Dick
warf73
02-25-2014, 05:10 AM
Lathesmith made mine .478 great work and fast. Lee push thru
frankenfab
02-25-2014, 08:57 AM
Midway has a .476 RCBS in stock, $26.99
alamogunr
02-25-2014, 09:28 AM
I got one from Lee about 3 years ago. Took about 3-4 weeks.
44man
02-25-2014, 10:05 AM
Lee made mine.
DLCTEX
02-25-2014, 11:10 PM
I got mine from Midway. RCBS.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.