user55645
02-17-2014, 10:50 PM
Hello gentlemen. Finishing up a 16", 1:16, 45WM bolt rifle. I plan on putting some 220SWC, 255-260HP and 300-325SWC or FN boolits down it. The 220 and 260s would be supersonic for target/plinking and whitetail. The larger pills will be for some suppressed fun. I plan to powdercoat the lighter boolits (had luck with 44mag at super velocities).
I have Unique, Universal, TiteGroup, H110 and LilGun for the 200 and 260s. I use these for my 6.5", 44mag with great results.
Would any of you be able to recommend a dose for the heavies?
Im also going to try cutting a skirt in the tail of the heavies and see if it aids in subsonic flight stability. Just for something to try, mainly.
Any load start points would be great or ideas I could work off of.
Thanks
I have Unique, Universal, TiteGroup, H110 and LilGun for the 200 and 260s. I use these for my 6.5", 44mag with great results.
Would any of you be able to recommend a dose for the heavies?
Im also going to try cutting a skirt in the tail of the heavies and see if it aids in subsonic flight stability. Just for something to try, mainly.
Any load start points would be great or ideas I could work off of.
Thanks