Anyone have an Accurate 43-310B mould?

[Gar]

I have one on order but really would to start forming my cases. To do that, I'd like to find out what the length of the bullet is from the heeled crimp groove to the top of the bullet (the portion that will stick outside the loaded cartridge) is so I can rough trim the cases before I fire form them.
I'm using this bullet for a 41 Swiss Vetterli.

[texassako]

About .66" sticks out. Matches with the drawing, .97" bullet with a .31" heel. I have not crimped in the groove yet; so it may be different if you will.

[Gar]

Thanks, that's close enough. I just didn't want to trim the 8mm Lebel cases too short before I fire form them.