PDA

View Full Version : RCBS 243-095-SP loads for 6mm Remington



ohland
02-01-2014, 04:49 PM
Handloader's Digest, 18th Edition, 2003, page 100 ISBN 0-87349-475-X

Range is 100 yards.

95254

:coffeecom

Wally
02-01-2014, 05:46 PM
I shoot that bullet in a Rem 700 .243 Win... 11.0 grains of Unique..very accurate...MV at about 1,700 FPS. I use Freechex GC's with mine. I found it also does well with Std. Lg Pistol primers.

Bullshop
02-01-2014, 06:08 PM
I just went and checked a box of 6mm Rem ammo loaded with the RCBS boolit and the load card says 23.5gn VV #133.
The rifle they are loaded for is the Rem 600 with the short 18" barrel. Its a good gopher load with which I have made 200 + yard hits on the pop can size targets.

GabbyM
02-01-2014, 06:27 PM
Couple of those powders surprised me with the accuracy. Like the two ball powders. TAC and 748.
In my 243 AI I've concluded Unique does as well as anything. May try some 2400 since I've not gone there yet. 11.0 grains under the 84 grain Lyman gets groups just under an inch and over 1,900 fps. I never had any luck with Reloder 7. Extra weight of the 95 may get it lit better. The 11.0 grains of Unique is enough pressure for a case neck seal and clean burn. Pretty sweet load and it cracks instead of booms.

Bullshop
02-01-2014, 06:52 PM
I just went and checked my data and found another load I use in the 600 Rem 6mm with the RCBS boolit.
24.5gn WC-844 with the RP 91/2 primer.