TES
01-29-2014, 04:46 PM
My question is.....
if you have a dillon powder through expansion die that drops the powder and bells the case mouth is the dillon powder check die and alarm able to except the belled case without sizing it down so that during the seating operation at the bullet feed die the bullet will still fall into a belled case mouth.
The "why" part.... I am having dies made from existing dies that are available to fit my old camdex and want to use the dillon powder measure and bell die in place of the old system as well as have a powder check that is more reliable than the current system in place. I just want to make sure that the two dies , both dillon, will do what I want...ie...powder drop and bell @ station 4 then @ station 5 have the powder check not goof up the bell and check powder with station 6 placing the bullet next station 7 seat and crimp and @ 8 drop bullet.
Thanks in advance,
TES
if you have a dillon powder through expansion die that drops the powder and bells the case mouth is the dillon powder check die and alarm able to except the belled case without sizing it down so that during the seating operation at the bullet feed die the bullet will still fall into a belled case mouth.
The "why" part.... I am having dies made from existing dies that are available to fit my old camdex and want to use the dillon powder measure and bell die in place of the old system as well as have a powder check that is more reliable than the current system in place. I just want to make sure that the two dies , both dillon, will do what I want...ie...powder drop and bell @ station 4 then @ station 5 have the powder check not goof up the bell and check powder with station 6 placing the bullet next station 7 seat and crimp and @ 8 drop bullet.
Thanks in advance,
TES