What lube would you suggest for a .300 Blackout?

[capt.hollis]

Im shooting a 155-312 bullet "Lee" mold. Using it for a .300 Blackout, and was wondering what you guys would suggest using for a lube? I am using a gas check. Thanks guys

[btroj]

For the velocities you are likely to get use anything soft and gooey.

[wcp4570]

I use BAC from LsStuff.com. I use the same boolit sized .309 with gas check and have no leading with velocity just over 1700fps. The owner is a member here as will as a vendor, see the link at the bottom of this page. His product is very reasonably priced.

wcp

[capt.hollis]

I use BAC from LsStuff.com. I use the same boolit sized .309 with gas check and have no leading with velocity just over 1700fps. The owner is a member here as will as a vendor, see the link at the bottom of this page. His product is very reasonably priced.

wcp
Thank You very much. I'm sized at .311

[mpbarry1]

felix lube should work