SAECO 924 For 357 Sig?

[tding]

Has anyone had experience using the SAECO #924 mould (.356 SWCGC) for 357 Sig boolits? If you have, can you share loading data. I want to find a suitable mould to use with Power Pistol in my P229.

[bobthenailer]

i have the rcbs 124 gr gc that is very accurate in a 9mm & 2 / 38 supers . for the hightest velocties try lilgun. ive found that my 9mm and supers are more accurate with the bullets sized to 0.357 dia. bob

[snuffy]

Has anyone had experience using the SAECO #924 mold (.356 SWCGC) for 357 Sig boolits?

A lot would depend on the shape of the boolit. The 357 sig has such a short neck that the crimp usually has to go on the front driving band to get it to hold onto the boolit.

I'm using the lee TL356-124-TC (356 Diameter) 124 Grain Tumble Lube Truncated Cone in a six banger with good results.
http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=340779&t=11082005

If that SAECO boolit has roughly the same shape, it should make a good boolit for the sig.