IllinoisCoyoteHunter
01-16-2014, 09:30 PM
Hi fellas, I am looking to have someone machine me an adapter for my derimming machine. I previously had another member make one for me and it turned out great. Problem is I have changed the design and I need a new adapter.
The adapter is simple. I will use it to connect a 3/4-16 ram on my air cylinder to a 1/2-13 bolt.
The adapter needs to be about 1" in diameter (can be larger if needed) and about 2.5" long. The female threads of each size can meet in the middle of the piece (or come close).
I would prefer this to be made from steel.
If someone is interested in making a couple bucks and help me out please let me know and i can get more details and pictures.
Thanks!
The adapter is simple. I will use it to connect a 3/4-16 ram on my air cylinder to a 1/2-13 bolt.
The adapter needs to be about 1" in diameter (can be larger if needed) and about 2.5" long. The female threads of each size can meet in the middle of the piece (or come close).
I would prefer this to be made from steel.
If someone is interested in making a couple bucks and help me out please let me know and i can get more details and pictures.
Thanks!