What shell Holder.????

[gee-gaw]

Hey guys,
Was wondering, what shell holder are you using for 7.63X39 cases? The rims on the cases I have are way too thick for an RCBS #6. Is there one made just for these thick rimmed cases? Inquiring minds want to know!!!
TIA,
Wayne

[plainsman456]

I have found the Lee holder does work with the thicker rims.
Can't recall the number though.

[pworley1]

http://www.reloadbench.com/gloss/rshellx.html

[Bullwolf]

I use the RCBS #32 shell holder with Winchester brass with good results. That was the shell holder recommended on the label of my RCBS die box.


93573




- Bullwolf

[gee-gaw]

Thanks Guys,
There will be an RCBS #32 in with my next Midway order!
Just for the info, I'm making 6.5 Grendel brass from 7.62X39. So I just break out my PPC shell holder ( a 7.62X39 derivative ) but it would not accept the thicker rims.
Again, thanks for all the responses,
Wayne