Lee Press bolt pattern

[Brucifer]

I want to cast a cement top for my casting station. I plan to insert four nuts in the cement to bolt my Lyman heating base to and want to also mount a Lee single stage 'C' press to use with a Lee hardness tester. the problem is I have not ordered the lee press and need the bolt pattern for it so I can cast nuts in the cement. Can someone help with the bolt pattern measurements?

I want to use the Lee Reloader 'C' frame press.

[JonB_in_Glencoe]

I assume you can print out a PDF like this and use the drawing as a template...right ?
http://leeprecision.com/cgi-data/instruct/90251.pdf
the holes marked RP are for Lee's Reloader Press

[Brucifer]

Thanks for finding this.

I printed it and it looks very small.
1-1/8 x 1-7/8

[LeftyDon]

You could also purchase the Lee mounting kit and use the universal mounting base plate. That way in the future you could mount other presses just by unbolting the press mount plate from the universal base plate.