crabo
11-30-2007, 11:06 PM
I had quite the afternoon. During the summer, I posted on a gun range that I was looking for used casting equipment. Right before Thanksgiving, I had a guy call me and tell me he had some H&G molds and some Saeco molds. I told him I would come and see what he had and if I could afford it, I would buy it all and try to sell what I didn't need. I had to fight traffic for 3 hours, but it was worth it.
Here's what I got:
2 68 plain based 6 cavity molds
1 280 wadcutter 6 cavity mold, looks like a 32
1 244 BB wadcutter 4 cavity looks like another 32
1 34 230 grain GI ball profile 4 cavity
All came with handles and all were made in Murphy Oregon. He has got 4 Saeco molds left. I ran out of money before he ran out of gear.
Do I need to preheat the mold on a hot plate to cut the cooled spue off the 2 that still have lead on the sprue plate?
Thanks,
Crabo
Here's what I got:
2 68 plain based 6 cavity molds
1 280 wadcutter 6 cavity mold, looks like a 32
1 244 BB wadcutter 4 cavity looks like another 32
1 34 230 grain GI ball profile 4 cavity
All came with handles and all were made in Murphy Oregon. He has got 4 Saeco molds left. I ran out of money before he ran out of gear.
Do I need to preheat the mold on a hot plate to cut the cooled spue off the 2 that still have lead on the sprue plate?
Thanks,
Crabo