8mm Karabiner ?

[IcerUSA]

Was just wondering if any of you have used this one in a 32 Win Spl ? Looking at the dim's on Midsouth it does look like it would . Curious is all :) .

Keith

[45 2.1]

Was just wondering if any of you have used this one in a 32 Win Spl ? Looking at the dim's on Midsouth it does look like it would . Curious is all :) .

Keith

Fat body and nose even for an 8mm. It was meant for worn military 8mms. If it fits in a 32 Spl, that rifle is very worn.

[IcerUSA]

I take it that you would not try to size that one down any then ? Nice looking chunk of lead tho :)

Keith

[45 2.1]

I take it that you would not try to size that one down any then ? Nice looking chunk of lead tho :)

Keith

Try it and find out whether it fits or not. Thats the best way. You'll probably have trouble with the nose though.

[IcerUSA]

Now the big question is does anyone have this mould and could I get a few to try out ?

Main reason is when I was checking a fartory load for the 32 WS it looked like the bullit was around 1.1" long and the Karabiner is 1.11" long , the bore on my 32 came out at .320 and the mould I have I size at .323 and shoots OK for a PB boolit , but the Kara is has a GC on it and I might be able to get upto 2000 FPS out of it if the nose will work in the chamber .

Just brain gears crunching at this time . :)

Keith

[leftiye]

Icer, if the nose doesn't fit, you can probly size it down separately if you're careful.