View Full Version : 8mm Karabiner ?
IcerUSA
11-30-2007, 12:11 PM
Was just wondering if any of you have used this one in a 32 Win Spl ? Looking at the dim's on Midsouth it does look like it would . Curious is all :) .
Keith
45 2.1
11-30-2007, 01:38 PM
Was just wondering if any of you have used this one in a 32 Win Spl ? Looking at the dim's on Midsouth it does look like it would . Curious is all :) .
Keith
Fat body and nose even for an 8mm. It was meant for worn military 8mms. If it fits in a 32 Spl, that rifle is very worn.
IcerUSA
12-01-2007, 01:02 AM
I take it that you would not try to size that one down any then ? Nice looking chunk of lead tho :)
Keith
45 2.1
12-01-2007, 08:18 AM
I take it that you would not try to size that one down any then ? Nice looking chunk of lead tho :)
Keith
Try it and find out whether it fits or not. Thats the best way. You'll probably have trouble with the nose though.
IcerUSA
12-01-2007, 11:36 AM
Now the big question is does anyone have this mould and could I get a few to try out ?
Main reason is when I was checking a fartory load for the 32 WS it looked like the bullit was around 1.1" long and the Karabiner is 1.11" long , the bore on my 32 came out at .320 and the mould I have I size at .323 and shoots OK for a PB boolit , but the Kara is has a GC on it and I might be able to get upto 2000 FPS out of it if the nose will work in the chamber .
Just brain gears crunching at this time . :)
Keith
leftiye
12-01-2007, 10:21 PM
Icer, if the nose doesn't fit, you can probly size it down separately if you're careful.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.