147gr+ 9mm hollow point mold options [Archive]

View Full Version : 147gr+ 9mm hollow point mold options

Poodleshooter

12-23-2013, 02:12 AM

Is anyone currently making a heavy for caliber .356 mold suitable for 9mm subsonic use?
Right now the best option I'm seeing is the 158gr .358" Lee RNFP modified by hollowpointmold.com. I've used that bullet (solid and sized down) for creating subsonic 9mm loads in the past, and it appears that this design may run about 145grs when hollowpointed.

wlc

12-23-2013, 04:58 AM

Not hollow point, but MP (MiHec) makes a really nice 147 9mm mold. Might be able to get him do a hollowpoint one or send it off for hollowpointing.

Ausglock

12-23-2013, 05:24 AM

Accurate Molds 35-168Z.
Great in 9mm, 38 Super and 357Sig

smokesahoy

12-23-2013, 06:37 AM

that one you already found looks like a great bullet design

bhn22

12-23-2013, 11:28 AM

You could have a Lyman 356637 hollowpointed too. They are normally over 150 gr so a hole in the nose wouldn't hurt them a bit. RCBS also offers a 145 gr 9mm design.

Artful

12-25-2013, 06:20 PM

358311 - 158 grn then Hollow pointed by Erik?
http://www.hollowpointmold.com/pictures/standard-hp-molds/358311.jpg
http://www.hollowpointmold.com/standard-hp-molds/