View Full Version : Any "PROVEN" load data for 245 gr. cast bullet load for the 454 Casull ?
casca
12-18-2013, 09:53 PM
Can't seem to find any good data for a 245gr cast & powder coated bullets for the 454 casull ?
Lee Mold , but it's out in garage and I can't remember mold number.
may use some of the bullets in the 460 S&W , if any data is available .
have about 1000 ready but no load for reference.
thanx in advance
casca
C. Latch
12-18-2013, 11:47 PM
Unless you're looking to push them to the absolute upper edge of safe loads, I don't know why you couldn't just use ~250 grain data.
If you are shooting a boolit from a Lee mold in 45 caliber it is not 245 grains. The 452-255-RF or 452-252-SWC is likely what you are referencing, a 255-260 grainer. The issues you may face in pushing maximal, if that is your intent, would be the hardness issues as a soft plain base cast boolit will have one hell of a transition from the cylinder throats to the forcing cone creating possible boolit slump, leading and inaccuracy issues.
casca
12-24-2013, 08:32 PM
thank you , rob
will get both my digital scales checked perhaps my eye glasses also
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.