Wickyd
12-17-2013, 12:10 PM
Went shooting with a friend the other day. He was shooting his new to him S&W shield.
He complained of a round jamming in shield and had to disasemble to get out.
The round was a Tula ammo 9 mm.
He handed the round to me and I noticed the primer had a normal firing pin strike ,bullet had not moved. I noticed the primer was flattened and back out some ,showing pressure signs.
Brought the round home and pulled the bullet. Powder was still there looked in case saw bulging where primer is but then I noticed
it had no flash hole.
never seen one of these before
Darrell
http://s6.postimg.org/aezoeg5fx/IMG_20131213_093719_254.jpg (http://postimg.org/image/aezoeg5fx/)http://s6.postimg.org/iyj2c7dsd/IMG_20131213_094312_296.jpg (http://postimg.org/image/iyj2c7dsd/)
He complained of a round jamming in shield and had to disasemble to get out.
The round was a Tula ammo 9 mm.
He handed the round to me and I noticed the primer had a normal firing pin strike ,bullet had not moved. I noticed the primer was flattened and back out some ,showing pressure signs.
Brought the round home and pulled the bullet. Powder was still there looked in case saw bulging where primer is but then I noticed
it had no flash hole.
never seen one of these before
Darrell
http://s6.postimg.org/aezoeg5fx/IMG_20131213_093719_254.jpg (http://postimg.org/image/aezoeg5fx/)http://s6.postimg.org/iyj2c7dsd/IMG_20131213_094312_296.jpg (http://postimg.org/image/iyj2c7dsd/)