View Full Version : Seating Gas Checks with a Lyman 45
http://castboolits.gunloads.com/showthread.php?223328-Seating-g-cs-with-a-Lyman-45
Viper225
12-16-2013, 12:46 AM
That worked pretty slick. I can see where the sizer die Top Punch for the bullets being used would be a big help with round nose bullets.
I will probably stay with my 7/8-14 Bolt in my loading press using the Lee Push Through Bullet Sizer Ram to set the bullets on. It works about the same way. I am seating my gas checks on large Flat Nose pistol bullets.
I have an old RCBS LAM. I do not think the plate will mount on it.
Bob
That worked pretty slick. I can see where the sizer die Top Punch for the bullets being used would be a big help with round nose bullets.
I will probably stay with my 7/8-14 Bolt in my loading press using the Lee Push Through Bullet Sizer Ram to set the bullets on. It works about the same way. I am seating my gas checks on large Flat Nose pistol bullets.
I have an old RCBS LAM. I do not think the plate will mount on it.
Bob
Most like it wouldn't .
Ben
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.