I must not have been thinking clearly!

[BrassMagnet]

89956

89957

[Bullshop Junior]

Those 25 auto dies might fetch a good price on ebay..

[Sweetpea]

Brassmagnet, I was just thinking, I could use one of those 284 die sets for a project I am working on...

Brandon

[plmitch]

Ron

Are those .264 win mag dies? If so I could use a set. Haven't been very good this year, can't say how I'll next year either...I'll try my best. Thanks

[BrassMagnet]

Ron

Are those .264 win mag dies? If so I could use a set. Haven't been very good this year, can't say how I'll next year either...I'll try my best. Thanks

They are all .284 Win (4 FL & 2 SB FL) or carbide .25 acp.

[cdet69]

You could have been still thinking clearly. It just shows your appreciation for those calibers.

[BrassMagnet]

You could have been still thinking clearly. It just shows your appreciation for those calibers.

Not me!

[472x1B/A]

By a slim chance does anyone out there have a neck belling die for .43 mauser, (11mm)? I sure could use one, all I have is a 2 die set and have to go to another press and use .44mag powder through die to bell the necks. Thanks inadvance and Merry Christmas to you all from Menards, no wait, from me.

[chuckbuster]

Hey plmitch
P-M me your address, I have something for you.
Kevin

[jonp]

How did you end up with 6 sets of each caliber? Was it the same way I ended up with 5 sets of Lineman Pliers just too good a deal to pass up? ;)

[AlaskanGuy]

I sure would love to get a set of them carbide 25 auto.....

[plmitch]

Hey plmitch
P-M me your address, I have something for you.
Kevin

Kevin, got the .264 win mag dies today. Thank you! Merry Christmas.

[chuckbuster]

By a slim chance does anyone out there have a neck belling die for .43 mauser, (11mm)? I sure could use one, all I have is a 2 die set and have to go to another press and use .44mag powder through die to bell the necks. Thanks inadvance and Merry Christmas to you all from Menards, no wait, from me.

I just noticed this question. If you want I can probably get you a copy of an "M" Die made. Just need a sample case. If interested let me know and I'll get you a price on one.
Kevin

[BrassMagnet]

I just noticed this question. If you want I can probably get you a copy of an "M" Die made. Just need a sample case. If interested let me know and I'll get you a price on one.
Kevin

I could use one, too!
I have some virgin brass and some cast boolits, too.

[chuckbuster]

Let me double check on price and I'll let you know.
Kevin

[Box13]

I would be interested in a set of 25 acp dies...Thanks...Robin

[woodsxdragon]

I hope someday to have the "problem" of too many dies... someday

[BrassMagnet]

I hope someday to have the "problem" of too many dies... someday

This thread may help you get a start.

http://castboolits.gunloads.com/showthread.php?223660-RCBS-NIB-Die-Sets-Precision-Mic-X-Sizer

Read through until you get to the final "still available" post and see if you need something on the list! It's not quite Christmas yet!

[BrassMagnet]

All the dies listed in this thread are now gone!

Good riddance to bad temptation!

BrassMagnet

[woodsxdragon]

This thread may help you get a start.

http://castboolits.gunloads.com/showthread.php?223660-RCBS-NIB-Die-Sets-Precision-Mic-X-Sizer

Read through until you get to the final "still available" post and see if you need something on the list! It's not quite Christmas yet!

I appreciate the offer and I'm glad to see the holiday spirit is alive on here. I have no firearms in any of those calibers so I will have to pass. Thank you though.

[BrassMagnet]

All are gone!

[BrassMagnet]

Those 25 auto dies might fetch a good price on ebay..

They provided six full measures of Christmas cheer!