Help with 10 ga loads ?

[FrankG]

Any 10 ga 3.5" loads around for buckshot ? I just swapped into a Invector BPS and have a few Fed and Rem hulls.I have SP10 wads, and an assortment of the old Alcan wads and cards. For primers I have cci209, Win 209 and cci157. Powders are AL7,2400,700X,AL5,HS6,Unique,Blue Dot, Herco that I have on hand and componets locally are scarce if not unobtanium .

From what my books say (Lyman) you dont want to interchange primers in shotshell loads ?


Help figuring out something with this would be greatly appreciated :grin:

[bikerbeans]

88240

Frank,


Hope this helps, it is from an Alliant loading data manual from about 10 years ago.


BB

[FrankG]

Thanks BB !

[no-bama in 2012]

I've had bad luck with ball powders in cold weather with the 10ga. I recomend testing new load combos by putting them in t he freezer overnight,and trying them. It might save a hunt.