7 mm stw dies/brass

[Kanitz8541]

Well I've found a good set of dies for a decent price, used of course. Know I'm looking for some brass anybody know what's good and what's not or know anyone that has any for sale? Thanks gents.

[Lloyd Smale]

in case you dont know its real easy to make it out of 8mag brass too. Just run it through your 7stw sizing die and youve got good cases.

[Kanitz8541]

Thanks for the info. I didn't know that.

[fredj338]

You could also use 300wby brass, both may require neck reaming. Try here.
http://mcgcreek.com/wi7mmstwun50.html

[bstone5]

Anneal the necks on the 7 mm STW. The neck area will crack after just 3 reloads if you do not anneal.

[Lloyd Smale]

never had that problem. Ive got some i hunted with this year that were on there 5th loading without anything but a one time trimming after 3 firings.
Anneal the necks on the 7 mm STW. The neck area will crack after just 3 reloads if you do not anneal.

[cdet69]

The only problem I have had is the primer pockets opening up. This is with factory loads and not my reloads. The biggest culprit was Federal factory loads.