40-60 wcf dies for 310 tool

[ed van hoose]

18nov13

hello all,

i am new to the site and am looking for these, if they exist. so far i have had no luck. does anyone know?

[Green Frog]

You need #153 dies, probably a neck sizer and a seating die. They aren't the most common ones out there, of course. BTW, if you need any other dies or the numbers for them, a list I put together a few years ago is posted on CastPics linked to the bottom of the page on this site. The list is in numerical order, so you can just scan through it until you find the cartridge you want and find its code number. Some good news is that since these dies neck size only, you may be able to find a cartridge with similar neck dimensions and use that number to find a more common die set. Need more info? Drop me a PM.

Froggie

[Green Frog]

Based on the comparison of specs, you should be able to use the currently produced Lyman 40-65 dies for the 310 tool to load your 40-60 WCF. You might want to check the specs for yourself and see what you think.

Froggie