View Full Version : external counter sink
Is there such a tool/cutter for chamfering the outside of case mouth's?
Wizwheel
11-18-2013, 09:54 AM
There are Lee haters here, but I am a fan! This tool does it all:
http://leeprecision.com/chamfer-tool.html
I used the Lee tool for lots of years, but lost mine. Lyman makes a couple also; here's one...87855
There are Lee haters here, but I am a fan! This tool does it all:
http://leeprecision.com/chamfer-tool.html
I was looking for something that I could mount in a drill press, but thatnk's!
I used the Lee tool for lots of years, but lost mine. Lyman makes a couple also; here's one...87855
Does it come off the handle and can it be drill press mounted?
Tool head is threaded into the handle, easily removed...
louism
11-18-2013, 01:21 PM
I chuck the Lee tool in my lathe. I see no reason it would not work in a drill press if your chuck is large enough. I think 1\2 inch would do it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.