Ooops bonehead mistake! BL-C(2) in 32 S&W Long HELP.

[Corvette]

Ok so hi y'all,
I screwed up today, while being somewhat in a hurry, and not actually looking at what bottle I grabbed, I loaded 6rds of 32 S&W Long with approx 3grs (.17cc) of BL-C(2) instead of TiteGroup. So my question is, as it is a slow burning powder, will these be safe to fire? Or is it even enough to push the bullet out of the barrel?

Thanks in advance

[Heavy lead]

pull the bullets

[Corvette]

Ok that's what I figured, just thought I'd ask people who know more than I do.

Thanks

[jimb16]

Pull the bullets....

[KYCaster]

Pull the bullets.....



Is there an echo in here?

[AlaskanGuy]

Ummmmm dont take any chances.... Pull the bullet

[waksupi]

Slow stuff, wouldn't hurt the gun, but you most likely WOULD be driving every bullet out of the bore. Not worth it.

[rintinglen]

+4 on pulling the boolits--I once inadvertently loaded some 38 specials with 3.0 grains of WW-748 under a H&G 50 WC. They never even cleared the cylinder gap. After I drove the first two back into their cases, I brought the rest home and discovered my mistake. It takes a while to "hammer" out 250 cartridges--be glad you only have 6.

[Hickory]

Pull the bullets or throw them away.