Your favorite 32 H&R Mag loads?

[Wheelgun]

I just picked up an awesome Ruger Single-Six in 32 H&R Mag. As of right now, the only pistol powders I have are Bullseye, Unique, & TiteGroup. The mold I have for it is Lee 93gr RNFP, dropping .314 & 95gr, My loading manual only has data for jacketed, and 98gr WCs. I'm just wondering what would be the best loads for target & small varmint control.

Thanks guys!

[Outpost75]

My go-to load for field use in my Ruger Single Six. 32 HRM is the 98-grain Saeco #325 SWC with 3 grains of Bulseye for 980 fps from the 4-5/8" barrel and 1-1/2" groups off sandbags at 25 yards. Wonderful small game load which kills cleanly without excessive meat destruction.

[Larry Gibson]

I use 3 gr Bullseye with the Lee TL314-90-SWC and the Hornady Swaged 32 cal 90 gr SWC in Starline cases with WSP primers. Runs 1010 fps from my Ruger Single Six with 6 1/2" barrel (original run) with exceptional accuracy. I suspect that load would do very well for you with your Lee cast bullet.

Larry Gibson

[helice]

Wheelgun,
Welcome aboard!

[Wheelgun]

Thanks I appriciate the help.

Thanks, I'm really enjoying this site

[rintinglen]

That 3.0 grain Bullseye load with any 90-100 grain boolit is a dandy. I have used it with a 311-245, 32-98 RCBS SWC, a 100 grain LBT boolit, a 98 grain SAECO RN design, and it worked well with every one of them, especially the RCBS boolit.

[Hickory]

I use Unique almost exclusively for all my loads in my single six.
3.2 - 3.5 grs. will get you a nice plinking load with most boolits.

[like it all]

I'll go with hickory, Unique has proved very good in both my SSM's. Especially with the 90 gr. tumble lube LEE SWC. 231/hp38 work very well also.:-)

[bubba15301]

i used 2400 when i had a .32 mag with 100 gr swc . that was in a ruger bisley

[19112TAP]

AA #7 and RCBS 98 gr SWC or same powder with 31133 HP.

[Corvette]

I've used 2.5gr of TiteGroup w/ 90gr LSWC and it works well for me. Only used it on targets and skunks, which it's great at.

[Fishman]

This is not what you have on hand but 10 gr of H110 under a 115 gr keith style boolit shoots great out of two single sixes and to the same poa as my lee 93 gr bullseye loads. The H110 load was out of Handloader as I recall and many references on the net. As always, verify internet handloads.

[NoZombies]

With the 93 grain Lee RN 2.7 grains of tight group seems accurate in the single six, but I haven't shot that load in that gun enough to say beyond that.