randyrat
11-11-2007, 09:13 PM
I made it to the range today and shot my marlin 30-30 with my own cast c309-170TL under a worked up load of IMR 3031. I made it to 26.5 grains and seen no need to any farther, they were so dang accurate i stopped right there. At 25 yds i shot 8 rds- One ragged hole and 2 holes 1/2 inch away that i called ( i squeezed the trigger on a heart beat) Now i just have to figure the balistics at 100 yds and set my Nikon BDC (bullet drop compensation) or hold over. After deer hunting i'll have to play with some 300-400 yd shots( no i'm not that good but its fun) I must thank the gang here for some advice on this powder. * side note* I must be almost right on/ close to the rifling, i'm seated at 1.56 and it still feeds fine and shoots great. Anybody know the general ballistics of this round up to 200 rds. My bullet is 180 grs. ( general idea)
26.5 grs of IMR 3031
Win LRPs
seated at 1.56
180 gr GC @ 14.3 BHN sized at .309 tumble lubed
Out of a Marlin 336 with ballard rifling
26.5 grs of IMR 3031
Win LRPs
seated at 1.56
180 gr GC @ 14.3 BHN sized at .309 tumble lubed
Out of a Marlin 336 with ballard rifling