Tweek'ed out loadmaster/380acp

[gunoil]

I have to do this, i shoot alot. Was alot of work over last year and help of :
mrbulletfeeder.biz
mikesreloadingbench.com
youtube
castboolits
Hi-Tek-Supercoat
local machine shop

video l made tonite with iphone5: l love plinking 380's.
http://www.youtube.com/watch?v=5SJ9meSDiio


http://i1113.photobucket.com/albums/k511/putt2012/null_zpsbb0362d2.jpg

LCP,TCP,P3AT,M.deserteagle,g26,xds46,sig938,subK20 00/40cal/glock

[Mike Kerr]

Impressive results from the Load Master. Looks like you might be running a cyclic rate of 850 to 900 rds per hour. Since you have to reload, reset, bullets, primers, cases etc. etc. every few minutes I'm wondering what an effective rounds per hour would be for your set up. (assuming you have your QC at 97-98% good).

Anyway, looks good.

[Puddin99]

I like your mod for the powder. I hate dealing with that chain. What kind of light are you using? Is that a custom bullet feeder?

[44Vaquero]

Gunoil, Sweet looks like she is running great. Well worth the extra effort and minimal expense.

I love that Mrbullerfeeder, they are a vast improvement over Hornady's or RCBS units!

[gunoil]

Yea, just showing off mrbulletfeeder.biz drop die. Call Rick up and buy ya one.

The flashlite came from harbour freight, 2$ and all l did was drill out center hole of die plate. Thick as a dime. I did mask off threads top and bottom first.

The eye bolt, and spring came from home depot, I used a #3 drill bit to drill thru press for eyebolt. Two nuts and lock-washer not to tight. To change disk: turn off hopper, hold some container under hopper,, move lever to clear powder. Then just slide disks out the front and slide new one in. l pencil anything near powder.
http://i1113.photobucket.com/albums/k511/putt2012/null_zps6fe8b15d.jpg

Most my loadmaster stuff came from: mikesreloadingbench.com Call em up, hes retired. Love his stuff and it truly works and dirt cheap.

[boltons75]

Just curious, what was the price of just the bullet feeder die?

[44Vaquero]

Prices here, He is only using the bullet feeder body not an entire unit so I think his cost may be less.

http://www.doublealpha.biz/bulletfeeder.htm?osCsid=e997b18c068f13f19c425ce5c8 79b61a

[boltons75]

Prices here, He is only using the bullet feeder body not an entire unit so I think his cost may be less.

http://www.doublealpha.biz/bulletfeeder.htm?osCsid=e997b18c068f13f19c425ce5c8 79b61a

Ouch, those shipping prices hurt...

[gunoil]

call Rick on phone in AZ. Hes owner of mrbullet. He has some @ home even though his units are made by twoalpha. Call Rick and buy ya a drop-die of what caliber you want/around 55$.

mrbulletfeeder.biz