View Full Version : New pin for 429640 HP mold!!
kevmc
10-26-2013, 03:05 PM
I just finished making a pin to cast solids with my 429640HP mold.......
Can't wait to cast with it and see what I've got!!
I'm guessing it'll be ~295 grs with GC on.
If it shoots like the HP version does, should be awesome!!!!
Meplat is .290 (68%), should make quite an impact on whatever is on the receiving end!!
Post photos of your handiwork and the new bullets? ;) ;)
Jerry
kevmc
10-26-2013, 03:30 PM
I'll have to figure out how to do so.......it'll be tomorrow tho.
kevmc
10-26-2013, 03:34 PM
It's a Lyman mold, I believe fairly new.....
kevmc
10-26-2013, 03:48 PM
85460
It's a Lyman mold, I believe fairly new.....
Well, that weren't hard!!!
Haven't mounted a handle just yet, want to cast a few and see if I need to shorten the end at all first.
BACKTOSHOOTING
10-26-2013, 05:41 PM
Well thats some nice looking work right there
Well thats some nice looking work right there
I agree !
Jerry
kevmc
10-27-2013, 03:19 PM
Old and the New!!
solids are 282 naked.....Hp's are 273 fully dressed.
Pin is .290 dia, but cast bullets look like maybe .300 Meplat
85559
Time to load and shoot!!!
kevmc
10-27-2013, 06:35 PM
Ready for the range!!
85581
Solids weigh 290 gr dressed up.
Loaded with 17.5/2400 Fed 150, BAC , .431
cbrick
10-27-2013, 07:22 PM
Meplat is .290 (68%), should make quite an impact on whatever is on the receiving end!!
I'll bet your right. :mrgreen:
Very nice work, let us know how they shoot.
Rick
kevmc
10-28-2013, 01:10 PM
I'll bet your right. :mrgreen:
Very nice work, let us know how they shoot.
Rick
85655
Not bad for my shooting>>>right at 3" @ 50yds ( from top left to bottom right)
24 shots...12 HP's and 12 of the "new pin" solids....fliers equally split (ME!)
Vel for HP's 1209, solid vel was 1175
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.