Encore 209 50 cal value

[27judge]

I have a encore 209 50 cal stainless with the barrel shortened by David White to 20 " very low use has 6 screw scope base and three rings . What are these rifles going for these days tks ken

[10 ga]

Frame, stock and barrel or just barrel? Wood or composite, regular or TH, what kind recoil pad, etc... what kind of use and powder/bullet loads were used? Trigger job or factory trigger? All makes a big difference in price. 10

[mooman76]

Check some of the auction sites and they will give you an idea.

[27judge]

You Sir are correct here is some needed info frame, barrel ,composite stock , Complete gun . HAS a trigger job by David White and the barrel has been shortened to 20 " by David White of D&T customs guns I believe he post on this forum . Has a 6 screw base by White and comes with 3 rings. I will check my records as to the loads used and post my loads tomorrow . tks ken

[27judge]

Gun shot real good with t/c shock wave bullets in 200 and 250 gr. I used 2 pyrodex pellets with both bullets. I also used 70 gr. of lose pyrodex with a 240 gr 44 cast bullet in a green sabot as a plinking load it shot real good at 50 yards. Im wondering if i may be better off to part the rifle out barrel, frame, stock. I believe its had about 200 rds down the barrel tks ken

[Odinbreaker]

David Has a classified section on hi web site. Barrel about 200 frame 250 stock 125 to 150. Greybeard has a encore classified section. I sold several itens there.

[10 ga]

Odinbreaker is about right. There is a swapin/sellin forum here and that might be a good start. If you want to move the whole thing try Modern Muzzleloader classified forum. I'm doing a 700ML conversion and putting a .45 pacnor on my Savage MLII now or I'd send a PM. 10 ga